2N StarPoint manual - Manual (Page 15)

15
2.2 Incoming calls
Answering Incoming Call
An incoming call is signalled by displaying the calling station name and/or telephone
number or the called number if possible. Names from your private phone directory or
the system administrator directory are assigned to the numbers.
Pick up the handset to answer the call. Press the confirmation or HandsFree button
to answer the call in the HandsFree mode.
Ringing Volume Control
Suppose you do not want to answer or reject a call yet do not want to be disturbed by
your telephone's loud ringing. In that case, either lower the volume or mute the call as
follows.
Push to adjust the ringing volume. a)
Push the or arrows, select and press to mute ringing b) Ringer off
of an incoming call.
Rejecting Incoming Call
Use the or arrows, select and press for confirmation. The Reject call
calling subscriber will get the busy tone.
Or, you can use the programmable button. Refer to Esc Programmable Buttons -
for Esc button programming. Setting
The diagram below shows a complete incoming call menu.