AirLive WHA-5500CPE-PCBA - Manual (Page 11)

1. Introduction
1.3.6 WISP Router Mode
In WISP Router Mode, WHA-5500CPE is connected to several computers and acts like a
Client mode AP. With IP sharing function, the computers can share the WISP connection
via WHA-5500CPE.
1.4 Set up the device
The WHA-5500CPE can be managed remotely by a PC through either the wired or wireless
network. To do this, the WHA-5500CPE must first be assigned an IP address, which can be
done using one of the following two methods.
1.4.1 STATIC IP
The default IP address of the LAN interface of an WHA-5500CPE is a private IP address of
192.168.1.1, and a network mask of 255.255.255.0. This means IP addresses of other
devices on the LAN should be in the range of 192.168.1.2 to 192.168.1.254.
This IP address can be modified to either a different address in this same subnet or to an
5
AirLive WHA-5500CPE User’s Manual