AirLive WHA-5500CPE-PCBA - Manual (Page 23)

3. Basic Configuration
3.1.3 WIRELESS SETTINGS
Setup Wizard>>Wireless Settings
Network ID (SSID): The SSID is the network name used to identify a wireless network. The
SSID must be the same for all devices in the wireless network (i.e. in the same BSS).
Several access points on a network can have the same SSID. The SSID length is up to 32
characters. The default SSID is “airlive”.
Disable SSID Broadcasting: An access point periodically broadcasts its SSID along with
other information, which allows client stations to learn its existence while searching for
access points in a wireless network. Check Disable SSID Broadcasting if you do not want
the device to broadcast the SSID.
Regulatory Domain: Please make sure that your regulatory domain matches your region.
The default value is “United Kingdom”.
WLAN Mode: Select “11a” or “Super A”. Choosing “11a” allows only 802.11a client
stations to get associated 802.11a outdoor range spectrum AP with maximum data rate
54Mbps; Super A mode is Atheros proprietary data exchange standard, it allows AP/Client
to connect with other AirLive product of which Atheros Super A mode is available.
Channel: Select a channel from the drop down menu. All devices in a BSS must use the
same channel. You can select Auto to let the system pick up the best channel for you.
The available channels are different from country to country and for
different WLAN mode.
17
AirLive WHA-5500CPE User’s Manual