AirLive WHA-5500CPE-PCBA - Manual (Page 15)

2. Install the WHA-5500CPE
Step 6: Make sure that the other side of
Ethernet cable is out of housing. Close
the housing. Step 5: Put the Ethernet cable along the
module, till the exit (at the bottom of
Housing).
Step 8: Plug the Ethernet to the PoE “P
+ DATA OUT” jack of injector. Step 7: Scroll up 4 screws well. Be
careful, this is very important; it could
protect your device against the water.
9
AirLive WHA-5500CPE User’s Manual