AirLive WHA-5500CPE-PCBA - Manual (Page 34)

3. Basic Configuration
3.2.4 MAC FILTERING SETTINGS
Advanced Settings>>Mac Filtering Settings
The WHA-5500CPE allows you to define a list of MAC addresses that are allowed or
denied to access the wireless network.
Disable MAC address control list: When selected, no MAC address filtering will be
performed.
Enable GRANT address control list: When selected, data traffic from only the specified
devices in the table will be allowed in the network.
Enable DENY address control list: When selected, data traffic from the devices specified
in the table will be denied/discarded by the network.
To add a MAC address into the table, enter a Mnemonic Name and the MAC Address,
and then click ADD. The table lists all configured MAC Filter entries.
To delete entries, check the corresponding Select boxes and then press DELETE
SELECTED.
3.2.5 OPERATIONAL MODE
The WHA-5500CPE can be configured to operate in one of the following modes as
mentioned previously in Chapter 1:
AirLive WHA-5500CPE User’s Manual 28