AirLive WHA-5500CPE-PCBA - Manual (Page 33)

3. Basic Configuration
Assign a specific name and IP address for your SNMP trap manager:
A trap manager is a remote SNMP management station where special SNMP trap
messages are generated (by the router) and sent to in the network.
You can define trap managers in the system.
You can add a trap manager by entering a name, an IP address, followed by pressing the
ADD button.
You can delete a trap manager by selecting the corresponding entry and press the
DELETE SELECTED button.
To enable a trap manager, check the Enable box in the corresponding entry; to disable it,
un-check the Enable box.
27
AirLive WHA-5500CPE User’s Manual