AirLive WHA-5500CPE-PCBA - Manual (Page 32)

3. Basic Configuration
3.2.3 SNMP Settings
Advanced Settings>>SNMP Settings
This screen allows you to configure SNMP parameters including the system name, the
location and contact information.
System Name: A name that you assign to your 802.11a+g Router. It is an alphanumeric
string of up to 30 characters.
System Location: Enter a system location.
System Contact: Contact information for the system administrator responsible for
managing your 802.11a+g Router. It is an alphanumeric string of up to 60 characters.
Community String For Read: If you intend the router to be managed from a remote SNMP
management station, you need to configure a read-only “community string” for read-only
operation. The community string is an alphanumeric string of up to 15 characters.
Community String For Write: For read-write operation, you need to configure a write
“community string”.
AirLive WHA-5500CPE User’s Manual 26