AirLive WHA-5500CPE-PCBA - Manual (Page 55)

3. Basic Configuration
3.8.2 WISP Router DHCP Server Settings
Advanced Setting >> DHCP server Setting
DHCP stands for Dynamic Host Configuration Protocol. The DHCP server dynamically
assigns IP addresses (from a pre-defined list) to clients when they log on. The client will
request a new IP when the specific period of time is about to run out. If it expires, the address
is returned to the pool of IP addresses.
Under WISP mode, select the check box of “Enable DHCP Server” to enable DHCP server
function.
The range of Clients’ IP addresses is from 192.168.1.2 to 192.168.1.254.
You can assign an IP address to a specified MAC address.
49
AirLive WHA-5500CPE User’s Manual