AirLive WN-200R - Manual (Page 17)

AirLive WN-200R User’s Manual 13
Figure 8: Wireless Screen
Data - Wireless Screen
Region
Region Select the correct domain for your location. It is your responsibil-
ity to ensure:
• That the Wireless ADSL Router is only used in domains for
which is licensed.
• That you select the correct domain, so that only the legal
channels for that domain can be selected.
Multi SSID
SSID With Multiple SSIDs, you can have 2 SSIDs on one AP. For
example, a Guest SSID without encryption for visitors to have
Internet access only, and a Admin SSID with encryption for
private use to secure your company resources.
Select the desired SSID from the list to configure.
SSID 1/2 This is also called the "Network Name".
• If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set
Identifier).
• To communicate, all Wireless stations should use the same
SSID/ESSID.
Broadcast
SSID If enabled, the Wireless ADSL Router will broadcast its SSID.
This allows PCs and other wireless stations to detect this Ac-
cess Point and use the correct SSID.
If disabled, PC users will have to manually enter the SSID and
other details of the wireless interface before they can connect to
this Access Point.
Isolation within
SSID If Enabled, devices that have the same SSID will not be able to
see each other.
Security Set-
ting The current Wireless security is displayed. The default value is
Disabled.