AirLive WN-200R - Manual (Page 19)

AirLive WN-200R User’s Manual 15
MAC Address
List Enter the MAC address(es) of the AP(s) into the fields to allow
the following access points to be connected to the wireless
router.
3.8 Wireless Mode
AP Mode
Multi SSID
SSID With Multiple SSIDs, you can have 2 SSIDs on one AP. For
example, a Guest SSID without encryption for visitors to have
Internet access only, and a Admin SSID with encryption for
private use to secure your company resources.
Select the desired SSID from the list to configure.
SSID 1/2 This is also called the "Network Name".
• If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set
Identifier).
• To communicate, all Wireless stations should use the same
SSID/ESSID.
Broadcast
SSID If enabled, the Wireless ADSL Router will broadcast its SSID.
This allows PCs and other wireless stations to detect this Ac-
cess Point and use the correct SSID.
If disabled, PC users will have to manually enter the SSID and
other details of the wireless interface before they can connect to
this Access Point.
Isolation within
SSID If Enabled, devices that have the same SSID will not be able to
see each other.
Configure SSID
1/2 Button Click this button to access the Wireless security sub-screen, and
view or change the settings. See the following section for details.