AirLive WN-200R - Manual (Page 44)

AirLive WN-200R User’s Manual 40
4. The next step depends on whether or not Wireless security has been enabled on the Wireless Router.
If Wireless Security is Disabled
If Wireless security on the Wireless Router is disabled, Windows will warn you that the Wireless network is not secure.
Figure 28 Insecure Wireless Network (Windows XP)
To connect:
• Check the checkbox Allow me to connect to the selected wireless network, even though it is not secure.
• The
Connect button will then be available. Click the Connect button, and wait a few seconds for the connection to
be established.
If using WEP Data Encryption
If WEP data encryption has been enabled on the Wireless Router, Windows will detect this, and show a screen like
the following.
Figure 29: WEP (Windows XP)
To connect:
• Enter the WEP key, as set on the Wireless Router, in the Network Key field.
• Re-enter the WEP key into the Confirm Network key field.
• Disable the checkbox Enable IEEE 802.1x authentication for this network.