AirLive WN-200R - Manual (Page 54)

AirLive WN-200R User’s Manual 50
Refresh Screen Update the data displayed on screen.
5.3 Connection Status - PPPoE
If using PPPoE (PPP over Ethernet), a screen like the following example will be displayed when the "Connection
Details" button is clicked.
Figure 42: PPPoE Status Screen
Data - PPPoE Screen
Connection Time This indicates how long the current connection has been
established.
Connection to
Server This indicates whether or not the connection is currently
established.
Negotiation This indicates the status of the Server login.
Authentication This indicates the authentication currently used.
IP Address The IP Address of this device, as seen by Internet users.
This address is allocated by your ISP (Internet Service
Provider).
Network Mask The Network Mask associated with the IP Address above.
Buttons
Connect If not connected, establish a connection to your ISP.
Disconnect If connected to your ISP, hang up the connection.
Close Close this window.
5.4 Connection Status - PPTP
If using PPTP (Peer-to-Peer Tunneling Protocol), a screen like the following example will be displayed when the
"Connection Details" button is clicked.