AirLive WN-200R - Manual (Page 87)

AirLive WN-200R User’s Manual 83
Figure 68: Status Screen - Bridge Mode
Data - Status Screen (Bridge Mode)
LAN
IP Address The IP Address of the Wireless ADSL Router.
Network Mask The Network Mask (Subnet Mask) for the IP Address
above.
MAC Address This shows the MAC Address for the Wireless ADSL
Router, as seen on the LAN interface.
Wireless
Region The current region, as set on the Wireless screen.
Channel This shows the Channel currently used, as set on the
Wireless screen.
Wireless AP This indicates whether or not the Wireless Access Point
feature is enabled.
Name (SSID 1/2) It displays the name of the SSID 1/2.
Broadcast Name This indicates whether or not the SSID is Broadcast. This
setting is on the Wireless screen.
MAC Address The MAC (physical) address of the Wireless Access Point.
System
Device Name The current name of the Router. This name is also the
"hostname" for users with an "@Home" type connection.
Firmware Version The version of the current firmware installed.
Current Time It displays the current time of the system.