Online manual not for resale purposes – BLITZ R-FIT-Fuel Intensity Tracer User Manual

Page 13

Advertising

6. NEEDLE METER

（１） At the MAIN MENU screen, choose the NEEDLE METER with the UP/DOWN switch, press the ENTER switch

to confirm, and then the needle meter will display.

（２） The digital display can display the present data value, the peak value, and the Airflow correction factor.

（３） The needle meter displays the present value on real time.

※The motion of the meter can be changed as the STROBO at the MAIN MENU.

（４） Displayed item setting method

① Press ENTER to select the controlled channel. (Above figure: PASS) Press the UP/DOWN switch to

select from the three channels (CH1⇒CH2⇒PASS), then press ENTER to confirm.

② Then the data item will be selected next. (Above figure: TACHO) Press the UP/DOWN switch to select

and ENTER to confirm.

※By pressing the UP switch, the monitoring data items will scroll from ①TAHO～⑤OPT2. Vice versa

with the DOWN switch.

③ The NEEDLE METER begins to display the monitoring data.

※The Air Flow correction factor is carried out in real time and also the present value is displayed in real

time.

ＮＥＥＤＬＥＭＥＴＥＲ Screen

Air Flow Correction factor

Data item peak value

Data item present value

Data item name

Controlled channel

Meter scale

Warning setting mark

Operation lock

● Please do not start the engine until the initial setting is performed.

It might damage the engine if the engine is started without the initial set up.

● The easy setup data inputted beforehand is based on normal vehicles. A resetting

of the data by a professional will be needed if this product is installed on tuned

vehicles.

It might break the engine if the setting data is not retuned.

● Be careful since each vehicle has different specificities.

Even if it is a normal vehicle, the data may not match because of the mileage,

different specificities, gasoline, etc. Please be sure to check by using an air/fuel

ratio meter.

● Start the engine in manual shown on Pg 11 5-(3), if the engine does not start even

after the data is loaded.

Online Manual Not For Resale Purposes

Advertising

Popular Brands

Popular manuals