Online manual not for resale purposes – BLITZ R-FIT-Fuel Intensity Tracer User Manual

Page 14

Advertising

（５） Operation method

Operation method at the time the monitoring data is displayed on the screen

(nothing is selected).

① Press the RIGHT switch for over three seconds and the selected peak

value will be cleared.

② Press the LEFT switch and it will move the MAIN MENU.

③ Press the DOWN switch and the monitoring data screen will change in

the following order.

Vice versa with the DOWN switch

④ By pressing the ＥＮＴＥＲ switch, it will move to the control channel

selection screen.

2D･3D TRACE

BAR GRAPH

ELLIPSE METER

NEEDLE METER

TACHO MAP

ＮＥＥＤＬＥＭＥＴＥＲ

↓

ＥＬＬＩＰＳＥＭＥＴＥＲ

【Caution】

・

Only when PR (pressure) sensor is chosen, the display of IN-MF (induction pipe pressure) will be

effective, and can be displayed.

・

When the Karman sensor is chosen, the Airflow voltage display will not take effect and voided, and it

cannot be displayed.

・

When nothing is operated for over 5 seconds at the time of setup, it will go back to the usual monitoring

screen. However, the setting changes carried out by then will take effect.

↓

ＢＡＲＧＲＡＰＨ

↓

２Ｄ・３ＤＴＲＡＣＥ

↓

TＡＣＨＯＭＡＰ

↓

ＮＥＥＤＬＥＭＥＴＥＲ

Online Manual Not For Resale Purposes

Advertising

Popular Brands

Popular manuals