ETC Element v2.1.0 - Manual (Page 191)

14
Using About 179
[About]
When [About] is pressed, the CIA presents the following information:
• Channel count for the console
• Software version
• Copyright notifications
• Device name
• Assigned as (Primary/Client/Offline)
• User ID
• Parameters (used of system total)
• Addresses (used of system total)
• Priority (ACN and Net2)
• IP Address
About System
When {About System} is pressed, the CIA displays a list of all network devices that are connected
to Element. These network devices include:
• Net3 RVI
• PC & Mac Clients
• Net3 Show Control Gateways
• Net3 I/O Gateways
• Legacy Unison CMEi processors
• Unison Paradigm processors
• CEM+, CEM3, or FDX
• Net3 Gateways
• ETCNet2 Nodes
Each network device will display the following information:
• Device Type
• Name/Component
• Status
• Connected
• IP Address
N o t e : If any errors or warnings are present at the rack, the CEM+, CEM3, or FDX will
display in red.
N o t e : Devices may appear more than once in this list if they have multiple roles on the
network.