ETC Element v2.1.0 - Manual (Page 34)

22 Element User Manual
Selecting Channels with Direct Selects
Channel direct selects are highlighted when selected. Channel selection is generally an additive
process, if channels 1-5 are selected, pressing {Channel 6} adds channel 6 to the selection,
leaving channels 1-5 also selected. Pressing {Channel 6} again will deselect the channel.
If you have labeled channels in patch, those labels will be displayed above the channel number
when viewing channels in the direct selects.
It is possible to double hit a channel button. This selects that channel and deselects any previously
selected channels.
• {Channel 1} - adds channel 1 to currently selected channels, if not currently selected.
• {Channel 1} {Channel 10} - adds channels 1 and 10 to currently selected channels.
• {Channel 1} {Channel 1} - selects channel 1, deselects all other channels.
• {Page  } - pages direct selects down by one page.
• {Page  } - pages direct selects up by one page.
Selecting Other Controls with Direct Selects
Selecting other controls, such as palettes, effects, macros, and magic sheets, will terminate the
command line. To post a control to the command line without terminating it, hold down [Shift] while
pressing the direct select.
Direct Selects in Flexi Mode
Direct selects can be placed into a flexi mode, which will remove
empty tiles. When {Select} is pressed, the {Show Flexi} button
will display.
N o t e : A single empty direct select tile may remain if the adjacent direct select tiles are
not sequential. This is to allow an easy way to insert a new direct select between
the existing ones.
On
Off
Show Flexi is Off
Show Flexi is On