ETC Element v2.1.0 - Manual (Page 268)

256 Element User Manual
Relay Out (remote trigger connector)
Allows you to set the Group and Address In values for the remote trigger port on the back of
Element.
RFR
This screen is used for setting up the Radio Focus Remote (RFR) to work with Element. For more
information on RFR,
See “Remote Focus Remote (RFR)” on page 270. For additional RFR
settings, see {RFR Settings}, page 49 .
USB RFR Settings
These settings need to match between the desk and the RFR. For more information on changing
the frequency and ID at the remote, see
Change Frequency and ID Setting, page 272 .
High Frequency Channel
The frequency that the RFR is using. There are 1-12 channels.
Network ID
The Network ID is a separate digital channel on a single high frequency (HF) setting. There are 1-
99 IDs available.
1
2
3
4
5
6
7
8
15
14
13
12
11
10
9
Ground
Ground
+ 12Vdc
+ 12Vdc
S1
S2
S3
S4
Relay Out, Normally Closed
Relay Out, Normally Open
Relay Out, Common
8 7 6 5 4 3 2 1
15 14 13 12 11 10 9
Remote Trigger
connector pinout