Recall a macro, Stop a macro, Delete a macro – ETC Element v2.1.0 User Manual
Page 226
214
Element User Manual
Recall a Macro
You can recall a macro from the command line, from the direct selects, run it from the execute field
of a cue, or from another macro.
To play macro 5 from the command line press [Macro] [5] [Enter]. “Running Macro 5” displays
above the command line in live while the macro is running, if the macro is a default or foreground
macro.
To run macro 5 from the macro direct selects simply press {Macro 5}. “Running Macro 5” displays
above the command line in live while the macro is running.
To run macro 5 from cue 1 press:
• [Cue] [1] {Execute} [Macro] [5] [Enter]
To run a macro from another macro, see the example under
Create a New Macro in the Macro
.
Stop a Macro
If you need to stop a macro while running (for example, during an infinite loop) you may press
[Escape] and the macro will stop.
Delete a Macro
You can delete a macro from the macro editor display by selecting the macro and pressing [Delete]
[Enter]. You will be prompted to confirm the deletion. Confirm by pressing [Enter] again, or abort by
pressing [Clear].
For Example:
Delete macro 5 from the macro list:
•
[5] [Enter]
•
[Delete] [Enter] [Enter]
Or from any display:
•
[Delete] [Macro] [5] [Enter]