General Machine Products 89010 Breeze Micro Fiber Cable Blowing Machine - Manual (Page 17)

Page 17 of 43 General Machine Products Co., Inc.
Installing cable.
The machine is fitted with a range of controls to help the operator to install cable in the mini-
mum time with the least risk of causing damage to the cable or tube.
These controls are identified and their function is described below.
Torque control:
This knob controls the motor torque, turn this clockwise to increase the torque (pushing force)
applied to the cable by the rollers. Turn counter clockwise to reduce the amount of torque
(pushing force) applied to the cable by the rollers.
Torque Range Switch:
Switches between “normal” torque range for blowing micro fiber cables and “low” torque
range for finer torque adjustment when installing 1-1.6 mm “blown fiber”.
Speed control:
This knob controls the motor speed, turn this clockwise to increase the speed of the rollers
(and the cable). Turn counter clockwise to reduce the speed.
Emergency stop:
Pushing this red knob downwards will stop the rollers feeding the cable. This knob may be
used to switch the machine off, whether or not there is a need to stop in an emergency. To
release, twist the red knob counter-clockwise.
Torque Control
Speed/Distance
Indicator
Speed Control Emergency Stop
Start
Torque Range
Switch