General Machine Products 89010 Breeze Micro Fiber Cable Blowing Machine User Manual

Page 6

Advertising
background image

Page 6 of 43

General Machine Products Co., Inc.

GENERAL PNEUMATIC SAFETY INSTRUCTIONS

The GMP Fiber Optical Cable Blowing Machine is a pneumatic device, using pressurized air
to project cable at high velocities. Please observe the following precautions when operating
the Cable Blowing Machine:

1. Compressed air can cause flying debris. This could cause personal injury. Always wear

personal protective equipment.

2. Insure no personnel are in the manhole at the far end of the cable run. Severe personal

injury may result.

3. Never open the air chamber when pressurized.
4. Only authorized, fully trained personnel should operate the air compressor.

GENERAL ELECTRICAL SAFETY INSTRUCTIONS

The machine has electronic and electrical power and control circuits. Electric shock hazards
exist that could result in severe personal injury. Observe the following precautions to avoid
electrical hazards:

1. Do not operate in water.
2. Do not expose the machine to rain.
3. Do not remove cover of electronic control assembly. There are no user serviceable parts

inside.

4. Refer servicing to qualified service personnel.

Advertising