General Machine Products 89010 Breeze Micro Fiber Cable Blowing Machine - Manual (Page 25)

Page 25 of 43 General Machine Products Co., Inc.
In-Feed
Out-Feed
Cable Guide Set 32875
In-Feed
Guide Insert
Set - 32877
14. Blown Fiber Conversion (1.1mm, 1.6mm and 2.0mm) with 5mm Micro Duct
Micro Duct
Seal
89549 5/pk
Seal Guide
Half Set
32876
Optional
Split Cable Guide
1.1mm 33090
1.6mm 33091
2.0mm 33426
Air Box
Assy
32879
Duct Clamp
Set
32874
Parts required for a 12
count blown fiber conver-
sion are available in a kit
form.
Blowing Tips:
• Insert a 2” piece of
5mm tubing in the In-
Feed Clamp Assy.
• The measuring fixed
roller should be ad-
justed so that just
enough pressure is on
the fiber to turn the
measuring wheel with-
out deflecting it.
• Set the tube in the air
box as shown in photo
to right. This prevents
possible buckling of
the fiber in the air box.
• Feed the fiber along
the guides and into
the tube, making sure
that the fiber is cen-
tered in the guides be-
fore you close the air
box.
• Ensure that the fiber
feeds freely through
the Breeze and into the
tube manually before
setting the drive rollers.
In-Feed
Guide set
32878
Solid Cable Guide
1.1mm 33087
1.6mm 33043
2.0mm 33425
Note: Cable guide must be inserted
against the air box to insure clear-
ance for the rollers. Failure to do
so will result in damage to the
drive wheels.
Drive Wheel Set
(Not Shown)
89589