General Machine Products 89010 Breeze Micro Fiber Cable Blowing Machine - Manual (Page 33)

Page 33 of 43 General Machine Products Co., Inc.
2. APPENDIX 2
This section makes recommendations for the initial setting of the torque control potentiometer
when installing a cable which has not been installed before, and, whose characteristics are
unknown.
The diagram to the left shows the torque
and speed control knobs set in the maxi-
mum counter-clockwise position.
In this position both torque and speed will
be minimum. (Zero)
The diagram to the right shows the
torque and speed control knobs set
in the maximum clockwise position.
In this position both torque and
speed will be maximum (see speci-
fication for details).