GeoDesy FSO GeoData20 series - Manual (Page 44)

44
Access Control provides the ability to limit associations wirelessly based on MAC address to an AP by
creating an Access Control List (ACL).
Policy
– define the policy:
 Open – no rules applied
 Allow MAC in the list – only listed MAC clients can connect to the AP (white list).
 Deny MAC in the list – only listed MAC clients can NOT connect to the AP (black list).
To add new rule, press the “+” button.
To remove the rule, first select the rule then press the “–” button.
To edit the rule double click on the field.
7.2.11 Traffic Shaping
Use Traffic Shaping to control download or upload bandwidth in order to optimize or guarantee
performance. There are two methods to control network traffic:
 Limit all traffic – limits overall APC upload and download traffic.
 Limit per IP traffic – limits upload and download traffic for a specified IP addresses.
Limit all traffic
Enable download shaping
– select to enable limitation of the download traffic.
Download limit, kbps
– specify the maximum download (from wireless interface to Ethernet
interface) bandwidth value in Kbps.
Download burst, kbytes
– specify the download burst size in kbytes.
Enable upload shaping
– select to enable limitation of the upload traffic.