Ping, Trace route, 4 ping – GeoDesy FSO GeoData20 series User Manual
Page 58: 5 trace route
58
Operating with the new settings, and in case the link fails, device will be rebooted in specified minutes,
thus the old settings will be set back.
Reboot after
– specify time in minutes, after which the device will be rebooted.
Start/Stop
– click to start or stop delayed reboot tool.
7.5.4 Ping
This command is used to test whether a particular host is reachable across an IP network. The Ping
results will be displayed graphically:
IP address or Host name
– specify the destination IP address or Host name.
Packet size
– specify the packet size.
7.5.5 Trace route
This tool is a route-tracing utility used to determine the path that an IP packet has taken to reach a
destination. This is useful when trying to find out why destination is unreachable, as you will be able to
see where the connection fails.