Spectrum analyser, 6 spectrum analyser – GeoDesy FSO GeoData20 series User Manual
Page 59
Advertising
59
Destination IP or Hostname
– specify hostname or IP address of the target host.
Max Hops
–Specifies the maximum number of hops to search for target.
Start/Stop
– click to start or stop traceroute tool.
7.5.6 Spectrum Analyser
The Spectrum analyzer
test displays detailed information about signal level of each APC unit’s
Antenna on each available frequency. This enables administrator choose the best available
Frequency/channel for the unit operation. The frequency list depends on the Country at which the unit
is operating, and chosen channel width.
Do not use the Spectrum analyzer on the remote unit of the link, as the connection to the device will
be lost during the test.
Click Start button to perform the test:
Advertising