Heidolph Synthesis 1 - Manual (Page 69)

69
E
1.3 Connect vacuum- / inert gas lines
1.3.1 Connect vacuum- / inert gas lines
The vacuum- / inert gas fitting accepts the # 8/6 PTFE tube shipped with the item.
Slip union ring over PTFE tube, install clamping ring, slip hose on nipple and pull
union ring tight.
1.3.2 3-way valve, vacuum- / inert gas (standard equipment)
vacuum- / inert
gas nipple
vacuum- / inert gas plenum
rear of item
union ring
3-way
valve
reaction block, Liquid
inert gas
vacuum
vacuum lines
nipple
plenum
sealing ring
union ring
PTFE vacuum
tube