INFICON Sensistor ISH2000 HySpeed Hydrogen Leak Detector - Manual (Page 47)

Hydrogen leak detector Sensistor ISH2000 HySpeed - Operating Instructions
46 OP-Sensistor ISH2000 HySpeed-EN-201203
EN
11 Spare parts and accessories
There are a variety of spare parts and accessories to the Sensistor ISH2000 HySpeed.
In the following table some of these are presented, for a complete list of all spare
parts and accessories please visit
www.inficon.com .
Table 11-1. Spare parts and accessories.
Part Part no.
Combox (Box for controlling the gas sensor and signal processing) 590-820
Built-in Probe H65 (Connects to the instrument via Combox) 590-250
Hand Probe PK50 (Connects to the instrument via Combox)
Hand Probe PK50-Flex (Connects to the instrument via Combox)
Hand Probe P50 (Connects direct to the instrument)
Hand Probe P50-Flex (Connects direct to the instrument)
Robot Probe R50 (Connects to the instrument via Combox) 590-930
590-940
590-780
590-790
590-820
Probe Cable C21
Length 3m
Length 6m
Length 9m
Length 4m (Spiral)
Length 6m (Spiral)
590-161
590-175
590-165
590-163
590-164
Probe Tip Protection Cap for Hand Probes P50/PK50 and P50/PK50-
FLEX
Probe Tip Filter for Hand Probes (P50/PK50) and R50
590-625
(Set of 500)
591-234
(Set of 50)
591-234
Power cable eu
Power cable uk
Power cable us 591-146
591-147
591-853
Hand Probe sensor (fit K50/PK50/R50) 590-292
Mounting kit Sensistor ISH2000 HySpeed 590-810
Phoenix connector to Sensistor ISH2000 HySpeed 591-792
O-ring seal 591-528
Reference Leaks. Standard or customer specific leaks for detector
calibration see separate
Data Sheet