INFICON Extrima Ex-certified Hydrogen Leak Detector - Manual (Page 17)

17
EN
INFICON - Operating Instructions EXTRIMA
7. Menu system
Change Test Mode
Esc < > Enter
The menu system is designed in the form
of a tree structure. The display shows all
the levels when browsing down through
the menus so that you can always see
exactly where you are.
• All changes in values are valid only
when saved using the Save or Enter
button.
• Use the Undo or Esc button to delete
a change in value and revert to the pre-
vious setting.
• Use the Esc button to browse upwards
through the menus and out of the menu
tree to the operating screen.
Main menus
To enter the menus, press Menu (button
on the far right). Press < and > to choose
between the six main menus, which are
explained in detail on the following pa-
ges. To exit the menu press Esc.
Change Test Mode
Select:
Analysis Mode,
Detection Mode and
Combined Mode.
See ”Change Test Mode” on p. 19.
NOTE: If no setting is made in
a menu or its submenues within
60 seconds, the instrument will
revert to the latest Test mode.