INFICON DataFID Portable Flame Ionization Detector for Leak Detection and Repair (LDAR) - Manual (Page 33)

074-578-P1A 33
Installing the Hydrogen Fuel Cylinder in the DataFID
1. If the hydrogen fuel cylinder retention plate is installed on the DataFID, remove it and set
it aside
.
2. Insert the hydrogen fuel cylinder into the hydrogen
fuel cylinder holder.
3. Guide the hydrogen fuel inlet into the DataFID
hydrogen fuel inlet.
4. Push the hydrogen fuel cylinder until you hear a
distinct click.
5. Attach the hydrogen fuel cylinder retention plate
with the two set screws.
Hydrogen Fuel Cylinder
Retention Plate
Hydrogen
Fuel Cylinder
Holder
DataFID
Hydrogen
Fuel Inlet