INFICON DataFID Portable Flame Ionization Detector for Leak Detection and Repair (LDAR) - Manual (Page 89)

074-578-P1A 89
7. APPENDICES
DataFID Specifications
EPA Standards Meets and exceeds US EPA Method 21 regulations
for fugitive emissions monitoring (LDAR)
LDAR Software Compatibility Integrates with LeakDAS® Mobile and GuideWare
monitoring software
OperatingTemperature Range 32°F (0°C) to 122°F (50°C)
Operating Humidity Range 0 to 100% (non-condensing)
L x W x H 13 in. x 12 in. x 3 in.
(330 mm x 305 mm x 76.2 mm)
Weight: 11.0 lb. (5 kg).
Battery 15 hours operation, Nickel metal hydride (NiMH)
Keypad Three menu keys
Display Large 2.8 in. (7.1 cm) diagonal active area.
Backlight manually activated
Alarm Audible at 85 dB, visual red LED on instrument
body
Connectivity Bluetooth technology embedded for wireless data
connection
Detector Flame ionization Detector (FID)
Response Time 90% of full scale in < 3 seconds
Operating Concentration Range 0.1 ppm to 50,000 ppm
Repeatability ±2%
Calibration Standards Methane, hexane or propane
Fuel 99.999% UHP (Ultra High Purity) Hydrogen
Fuel Cylinder Metal hydride, 70 liters capacity, 80 PSI cylinder
pressure, 70 hour discharge time / recharge 60
minutes
Fuel Cylinder Weight 1.9 lb. (0.8kg)
Fuel Cylinder Dimensions 6.5 in. (165 mm), 8 in. (203 mm) with coupling, 2 in.
diameter (51 mm)
Intrinsic Safety Class 1, Division 1, Groups A,B,C & D (UL 913)
FCC Class B digital device, pursuant to Subpart B, class
B of Part 15 of the FCC rules