INFICON CI-100 Crucible Indexer - Manual (Page 11)

1 - 1
IP
N 07
4-
54
4-
P1
B
CI-100 Crucible Indexer Operating Manual
Chapter 1
Introduction
1.1 Introduction
The CI-100 Crucible Indexer is used to rotate multi-pocket electron beam sources
through a rotary vacuum feedthrough. The CI-100 consists of a 3.5 in. half-rack
Controller, Motor Drive, Mounting Bracket, and interconnecting cable.
Figure 1-1 CI 100 Crucible Indexer
In addition to the capabilities you expect in a crucible indexer, the CI-100 has these
unique features:
 160 oz-in. torque at all operating speeds
 Direct drive—no pulleys to set or adjust
 Electronic calibration of each pocket – no mechanical adjustments
 Eight pre-defined pocket/banana configurations
 Custom user configuration—program any pocket/banana layout
 Universal 1 in. Bolt and 2 ¾ in. CF mounting bracket included
 Small, cool-running motor drive
 Digital I/O compatible with existing indexers