3 controller rear panel – INFICON CI-100 Crucible Indexer User Manual
Page 31
3 - 3
IP
N 07
4-
54
4-
P1
A
CI-100 Crucible Indexer Operating Manual
Ready LED
On when the indexer is positioned at a valid pocket, otherwise off.
Moving LED
On when the indexer is moving between pockets, or within a continuous pocket.
3.3 Controller Rear Panel
Figure 3-2 Controller Rear Panel
NOTE: The rear panel switches are only read at power up. Be sure to power off,
then on, after changing the rear panel dip switches.
Pocket Type Switch
1: Selects a four discrete pocket indexer.
2: Selects a six discrete pocket indexer.
3: Two discrete pockets, plus one 180° continuous.
4: Three discrete pockets, plus one 90° continuous.
5: Three discrete pockets, plus one 120° continuous.
6: Three discrete pockets, plus one 135° continuous.
7: Three discrete pockets, plus one 145° continuous.
8: One 360° continuous pocket.
1-8 OFF: Selects the custom configuration.
Option Select Switch
1: Selects Bi-Direction (on) or Uni-Direction (off) rotation.
2: Selects CCW (on) or CW (off) rotation in Uni-Direction mode.
3: UHV (on) stays within a single 360° arc.
4: High (on) allows speeds >.5 rpm.
5: BCD (on) uses BCD I/O, (off) selects Binary I/O.