11 recorder – INFICON XTC/C Thin Film Deposition Controller User Manual
Page 56
Advertising
2 - 28
IP
N 07
4-
18
3X
XTC/C - XTC/2 Operating Manual
2.6.10 Manufacturer’s Identification and
Serial Number Plate
This plate is installed at final assembly to identify the instrument’s model and
serial numbers.
Figure 2-19 Serial Number Plate
2.6.11 Recorder
A BNC type female connector that supplies analog voltage proportional to rate,
thickness, power or rate deviation. The function is determined by configuration
switches. Refer to
. See the Remote Command
description in
for how to choose this function via
the remote communications when using an XTC/C.
Figure 2-20 BNC Connector
Advertising
This manual is related to the following products: