INFICON SKY CDGxxxD (DeviceNet) - Manual (Page 25)

tira51e1 (2009-01) CDGxxxD.cp
25
Attribute
ID
Access rule NV/
V
Name DeviceNet
data type Description of attribute Semantics of values
3 →
"Semantics"
NV Data type USINT Determines the data type
of value and all related
attributes as specified in
this table. → "Semantics" section below
[default] = INT
4 →
"Semantics"
NV Data units USNIT Determines the units con-
text of value and all related
attributes. [default] = Counts
5 Get V Reading
valid BOOL Indicates that the value
attribute contains a valid
value. 0 = invalid
1 = valid (always set)
6 Get V Value INT or REAL Analog input value. The corrected, converted, calibrated
final value of the sensor.
→ "Semantics" section
7 Get V Status BYTE Alarm and warning state of
this object instance. = 0
10 Get NV Full scale INT or REAL The value of full scale for
the sensor. [default] = maximum allowable value
for the data type
25 Set NV Safe state USINT Specifies the behavior for
the value for states other
than execute. → "Semantics" section below
[default] = 0
26 Set NV Safe value INT or speci-
fied by data
type
The Value to be used for
safe state = safe value → "Semantics" section below
[default] = 0
32 Get NV Overrange INT or REAL Specifies the highest valid
value. The value above which attribute
reading valid is set to invalid.
[default] = maximum allowable value
for the data type
33 Get NV Under-
range INT or REAL Specifies the lowest valid
value. The value below which attribute
reading valid is set to invalid.
[default] = minimum allowable value
for the data type
94 Get V Sensor
warning Structure of
byte Bit definitions of sensor
warnings. default = 0
→ "Semantics" section below
95 Get V Sensor
alarm Structure of
byte Bit definitions of sensor
alarms. default = 0
→ "Semantics" section below
96 Get V Status
extension Byte Bit-mapped byte providing
additional status bits of an
S-Analog sensor instance. default = 0
→ "Semantics" section below
99 Get V Subclass UINT Identifies a subset of addi-
tional instance attributes,
services and behaviors.
3 = Capacitance Diaphragm Gauge
→ Instance 1
→ Instance 1
→ Instance 1
→ Instance 1
→ Instance 1
4.4.3.6 Instance Attributes of
Instance 2 / Atmosphere
Pressure Sensor
4.4.3.7 Semantics of S-Analog
Sensor Instance 2
Data type
Data units
Value
Safe state
Safe value