INFICON SKY CDGxxxD (DeviceNet) - Manual (Page 26)

26
tira51e1 (2009-01) CDGxxxD.cp
16 Bits are used as sensor warnings.
Data component Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Sensor warning byte 0 0 0 0 0 0 0 0 0
Sensor warning byte 1 0 0 0 0 0 0 0 0
16 Bits are used as sensor faults.
Data component Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Sensor alarm byte 0 0 0 0 0 0 0 0 0
Sensor alarm byte 1 0 0 0 0 0 0 0 0
8 Bits providing the current sensor alarm state of the instance
Data component Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Sensor alarm byte 0 0 0 0 0 0 Underrange
exceeded
= 0
Overrange
exceeded
= 0
Reading
invalid
1)
= 0
1) Logical inversion of reading valid
The S-Analog sensor object provides the following common services:
Service
code
Service name Description of service
0E
h
Get_Attribute_Single Returns the contents of the specified attribute.
10
h
Set_Attribute_Single Modifies an attribute value.
Service
Code
Service Name Description of Service
32
h
User Atmosphere
Adjust Performs an Atmosphere Adjust for the ATM-
Sensor
There are no state transitions associated with the invocation of this service. It is,
therefore, incumbent upon the user to establish the device into the desired con-
figuration prior to, and during the execution of this service. This will generally in-
volve exposing the sensor to a known environment and treating the values read
during execution of the services accordingly.
A success service response indicates that the service was accepted and the ap-
plication process started.
To perform the User Atmosphere Adjust Request vent the gauge to atmosphere
and then start the User Atmosphere Adjust Service without any target value. The
pressure value of the atmospheric pressure sensor is then tracked to the value of
the CDG.
Sensor warning
Sensor alarm
Status extension
4.4.3.8 Common Services of
S-Analog Sensor
Instance 2
4.4.3.9 User Atmosphere
Adjust Service