INFICON PEG100 Medium to Ultra-High Vacuum Gauge - Manual (Page 3)

1 Description
1.1 General
The PEG100 Penning Gauge is supplied ready for ope-
ration. Even so, we recommend to read these Operating
Instructions with care so as to ensure optimum operating
conditions right from the start.
These Operating Instructions contain important informa-
tion on the functions, installation, start-up, operation and
troubleshooting of the PEG100.
Important remarks concerning operational safety and
protection are emphazised as follows:
Warning Indicates procedures that must be strict-
ly observed to prevent hazards to per-
sons.
Caution Indicates procedures that must strictly
be observed to prevent damage to, or
destruction.
Note
Indicates special technical requirements that the user
must comply with.
The references to diagrams, e.g. (4/1), consist of the Fig.
No. and the item No. in that order.
Unpack the PEG100 immediately after delivery, even if it
is to be installed at a later date.
Examine the packaging for any external damage. Com-
pletely remove all packaging materials.
Note
Retain the shipping container and the packaging materi-
als in the event of complaints about damage.
Check that the PEG100 is complete (see Section 1.4).
Carefully examine the PEG100 visually.
If any damage is discovered, report it immediately to the
forwarding agent and insurer. If the damaged part has to
be replaced, please get in touch with the orders depart-
ment.
3
tina14e1 (0106) PEG100.ga
1 Description
1.1 General
The PEG100 Penning Gauge is supplied ready for ope-
ration. Even so, we recommend to read these Operating
Instructions with care so as to ensure optimum operating
conditions right from the start.
These Operating Instructions contain important informa-
tion on the functions, installation, start-up, operation and
troubleshooting of the PEG100.
Important remarks concerning operational safety and
protection are emphazised as follows:
Warning Indicates procedures that must be strict-
ly observed to prevent hazards to per-
sons.
Caution Indicates procedures that must strictly
be observed to prevent damage to, or
destruction.
Note
Indicates special technical requirements that the user
must comply with.
The references to diagrams, e.g. (4/1), consist of the Fig.
No. and the item No. in that order.
Unpack the PEG100 immediately after delivery, even if it
is to be installed at a later date.
Examine the packaging for any external damage. Com-
pletely remove all packaging materials.
Note
Retain the shipping container and the packaging materi-
als in the event of complaints about damage.
Check that the PEG100 is complete (see Section 1.4).
Carefully examine the PEG100 visually.
If any damage is discovered, report it immediately to the
forwarding agent and insurer. If the damaged part has to
be replaced, please get in touch with the orders depart-
ment.
3
tina14e1 (0106) PEG100.ga