INFICON PEG100 Medium to Ultra-High Vacuum Gauge - Manual (Page 7)

1.4 Equipment
1.4.1 Supplied Equipment
PEG100, DN 25 KF Part No. 351-000
PEG100, DN 40 CF Part No. 351-002
Replacement cathode plate of titanium --
Replacement ceramics disc --
3.5 mm jack plug --
Operating Instructions tina14e1
1.4.2 Accessories
Part No.
Replacement kit 351-490
consisting of:
Cathode plate of titanium (5 pcs.)
Ceramics disc (5 pcs)
Gauge
2 Operation
2.1 Installation
The PEG100 Penning Gauges should preferably be
mounted flange down. Inclined installation is possible but
the horizontal orientation must not be exceeded.
Flange up installation is not permissible because under
such circumstances condensate may collect in the
PEG100. This will either adversely affect the measure-
ments, or the sensor itself may possibly be damaged.
The PEG100 is equipped with a DN 25 KF or a DN 40
CF connection flange which is used to connect the
PEG100 to the mating connection flange on a vacuum
system with the aid of a centering ring and a clamping
ring.
The cathode plate (5/5) also acts as a baffle.
For the dimensional drawing, see Fig. 1.
7
tina14e1 (0106) PEG100.ga
1.4 Equipment
1.4.1 Supplied Equipment
PEG100, DN 25 KF Part No. 351-000
PEG100, DN 40 CF Part No. 351-002
Replacement cathode plate of titanium --
Replacement ceramics disc --
3.5 mm jack plug --
Operating Instructions tina14e1
1.4.2 Accessories
Part No.
Replacement kit 351-490
consisting of:
Cathode plate of titanium (5 pcs.)
Ceramics disc (5 pcs)
Gauge
2 Operation
2.1 Installation
The PEG100 Penning Gauges should preferably be
mounted flange down. Inclined installation is possible but
the horizontal orientation must not be exceeded.
Flange up installation is not permissible because under
such circumstances condensate may collect in the
PEG100. This will either adversely affect the measure-
ments, or the sensor itself may possibly be damaged.
The PEG100 is equipped with a DN 25 KF or a DN 40
CF connection flange which is used to connect the
PEG100 to the mating connection flange on a vacuum
system with the aid of a centering ring and a clamping
ring.
The cathode plate (5/5) also acts as a baffle.
For the dimensional drawing, see Fig. 1.
7
tina14e1 (0106) PEG100.ga