JUMO 705060 mTRON T - Multifunction Panel 840 Operating Manual - Manual (Page 150)

13 Configuration
150
13.11.1 Analog channels
Setup dialog
Parameter
Name Use default text or enter other text. Description of the group, with a max.
length of 21 characters. The description
is displayed in the individual visualiza-
tions.
Parameter Selection/settings Description
Parameter Selection/settings Description
Input signal 6 channels can be assigned to each of the 9 groups.
Analog input x Assigned signal
Analog selector Signal that is to be allocated to the input.
Line width Determines the width of the graphic measured value display.
Thin Thin line width (1 pixel)
Thick Thick line width (2 pixels)
Tol. band active Available as from channel 2 of a group.
Yes ( ), No ( ) If "Yes", the channel is compared with
channel 1 of the group. It must be
ensured that channel 1 of the group is
active (Input signal <> Inactive).
Positive tolerance Only available for channel 1 of a group.
10 "Positive tolerance" and the current
measured value of channel 1 form the
upper limit of the tolerance band. Only a
positive value can be entered.
?