JUMO 705060 mTRON T - Multifunction Panel 840 Operating Manual - Manual (Page 78)

7 Visualization
78
Group display
By touching the respective tab, the user can display 12 counters/integrators in a joint overview.
 Chapter 7.10.1 "Group display", page 76
Individual display
By touching one of the counter/integrator numbers, the user can switch to the corresponding
individual display.
 Chapter 7.10.2 "Individual display", page 77
Communication status
 Chapter 5.1.1 "Status line and Title line", page 42
Alarm
An alarm (Alarm1 or Alarm2) is marked with an orange or red background and an orange or
red bar. The colors can be configured in the setup program and using the multifunction panel.
Group rotation
The function switches to the next counters/integrators.
Home button
This function calls up a defined visualization. The function must be activated and configured
via the setup program.
 Setup program:
HMI > C ONFIGURATION LEVEL > S CREEN > U SER OPERATING LEVEL
NOTE!
This function is only available if sufficient counters/integrators have been configured.