JUMO 705060 mTRON T - Multifunction Panel 840 Operating Manual - Manual (Page 169)

169
13 Configuration
Setup dialog
The user can use the checkboxes to test the binary linking and determine the number of the
batch text. The checkboxes do not have any effect of the configuration of the multifunction pan-
el.
Binary linked text
If two digital signals are activated, for example, four texts can be shown; if all six digital signals
are activated, 64 different texts can be shown. Binary linking 1 has the valency 2
0
, binary
linking 2 has the valency 2
1
, etc.
(1)
(1) Checkboxes
B6 B5 B4 B3 B2 B1 Text
0 0 0 0 0 0 0
0 0 0 0 0 1 1
0 0 0 0 1 0 2
0 0 0 0 1 1 3
. . . . . . .
. . . . . . .
. . . . . . .
1 1 1 1 0 0 60
1 1 1 1 0 1 61
1 1 1 1 1 0 62
1 1 1 1 1 1 63
0 = "Inactive" is set or the signal is not active.
1 = "Inactive" is not configured and the signal is active.
For the output of the batch text, the "Start at text" parameter is added to the Text column.