JUMO 701550 di 308 - Digital Indicator Operating Manual - Manual (Page 28)

5 Operation
28
5.2 Level concept
The parameters for instrument setting are organised
at different levels.
vChapter 6 „Operator level“
vChapter 7 „Configuration“
vSetup program (Display/Operation -> Operation ->
Operation time-out)
User data
„USER“
The setup program allows the display and editing up
to 8 freely chosen parameters at this level.
vSetup program (Display/Operation -> User data ->
Parameters 1...8)
The user can assign a symbol for the representation
of each parameter. Otherwise, the default symbol will
appear. All letters and numbers that can be presented
by a 16 segment display are permissible.
H
Time-out
If no key is pressed for 180 secs the instrument
changes back to normal display!
Normal display
OPERATOR
P
i
d
User level
P
Operator level
- INPUT (analog inputs)
- LIMITCOM (limit comparators)
- OUTPUT (outputs)
- BINFUNCT (binary functions)
- DISPLAY (display)
- INTERFCE (interfaces)
Configuration level
P
i
d
CONFIG
P
> 2 sec
or time-out
Navigation principle
P
USER
1. USER only
visible if user data
is configured (setup program)
1
Up to eight freely chosen
Process data
EXIT
F
EXIT
F
parameters