JUMO 701550 di 308 - Digital Indicator Operating Manual - Manual (Page 55)

55
7 Configuration
Further
functions via
setup program
Several binary functions can be combined with each
other in the setup program. The text display can be
configured as an information or as an alarm text (with
colour change).
Parameter Value/
Selection
Description
Binary input 1 B-FUNCT1 0
1
2
3
4
5
6
7
8
9
10
11
no function
Key inhibit
Level inhibit
Display off (keys inactive)
Acknowledge limit comparator
Hold function
Reset min/max value
Tare function
Reset tare function
Text display
Go to the next scroll parameter
Colour change
Level inhibit:
The configuration level is inhibited.
Tare function:
The tare function is used to zero the display
value of the analog inputs and values (math)
derived from these inputs. The function is reset
after Power ON.
Text display:
With the binary function active, a configurable
text appears on the lower display: This text can
be uniquely defined (only through the setup
program).
...
Binary input 8 B-FUNCT8
Limit
comparator 1 LCFUNCT1
...
Limit
comparator 4 LCFUNCT4
Logic 1 L-FUNCT1
Logic 2 L-FUNCT2
Factory settings are shown bold.
*
No information or alarm texts are shown when
the instrument is in the USER, OPERATOR or
CONFIGURATION level.