Leica Biosystems EG1160 - Manual (Page 21)

Leica EG1160 – Paraffin Embedding Center 21
SET Mode (Programming)
The ARROW buttons are used to preselect the temperature, time and
days. The speed of the display increases (1-2 step mechanism), the
longer the button is held down.
6.1 TEMPERATURE SETTING
The temperature is preselected with the ARROW buttons. Once the
minimum or maximum value is reached, the indication will stop. The
value displayed when releasing the ARROW button will be stored
automatically, and heating and cooling will be activated accordingly.
The individual temperature settings can be activated or deactivated
with the ON/OFF button.
ON:
The previously entered temperature reads in the display. If the cur-
rent value is not changed, the microprocessor will adjust the tem-
perature to the displayed value.
OFF:
The temperature control function can be switched off if no specific
temperature is required. The previously entered temperature remains
in the memory but will not be activated.
The display reads:
In this case, the default reading is as follows:
6.2 ACTUAL TIME / DAY
Actual time and day are set with the ARROW buttons. An endless
search mechanism provides that the search run restarts from the
beginning automatically after attaining 23:59 or SUN.
The time/day indicated on releasing the ARROW buttons will be stored
automatically.
6.3 BEGINNING AND END OF WORK
The time when you start and stop work is selected with the ARROW
buttons. The endless search mechanism provides that the search run
automatically restarts from the beginning after attaining 23:59. Thus
the instrument will be operational on all days of the week defined as
workdays (see 6.4) at the previously selected time. The time indicated
on releasing the ARROW buttons will be stored automatically.
SET TEMPERATURES
PAR TANK
58°C
SET TEMPERATURES
PAR TANK
- - - -
PAR TANK - - - -
FR 11:10
SET TEMPERATURES
PAR TANK
58°C
TODAY IS ...
MO
THE TIME IS ...
12:30 HRS
START WORK AT ...
10:00 HRS
STOP WORK AT ...
16:00 HRS
10. Operation