Leica Biosystems ST5010 Autostainer XL - Manual (Page 38)

Instructions for Use V 2.3 – 10/2012 38
7. Trouble shooting
Introduction
AutoStainer XL continually monitors itself and will report any errors as they
occur. If a minor error occurs during staining the instrument will attempt to
correct the problem first. If it is unsuccessful then a message will be given
and the instrument will wait for the user to rectify the problem.
Some faults cause the alarm to sound. The alarm can be turned off by press-
ing [F1] Quiet.
[F2] Pause can be used to pause staining from the error message dis-
play.
A list of instrument messages and their meanings follows.