Lenze PROFINET Controller-based Automation - Manual (Page 16)

4 The Lenze automation system with PROFINET
4.4 PROFINET hardware for Lenze Controllers
16
Lenze · Controller-based Automation · PROFINET® Communication Manual · DMS 1.2 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4.4 PROFINET hardware for Lenze Controllers
MC-PND communication card
The MC-PND communication card serves to connect the Lenze Controller as I/O device (slave) to a
PROFINET network.
[4-5] MC-PND communication card
 Technical data of the MC-PND communication card ( 18)
Use
The MC-PND communication card is installed in the respective slot of the Lenze Controller.
[4-6] Example: Lenze Controller 3221 C with MC-PND communication card
MC-PNx-001
A Front panel
B Printed circuit board
C Coding
D Connection of Lenze controller
E PROFINET connection ( 19)
F
G
LED status displays of the MC-PND
communication card ( 37)