Lenze PROFINET Controller-based Automation - Manual (Page 38)

9 Diagnostics
9.2 Diagnostics in the »PLC Designer«
38
Lenze · Controller-based Automation · PROFINET® Communication Manual · DMS 1.2 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
9.2 Diagnostics in the »PLC Designer«
Only if an online connection to the Lenze Controller has been established, the Status tab displays
information on the
PROFINET status and I/O device statuses: