Lenze E94AZPM - Manual (Page 26)

l
26 EDK94ZPM113 DE/EN/FR/ES/IT 4.0
Scope of supply
Pos. Description
0 Installation backplane
1 Shield mounting kit for control cable and thin motor cable
Device size 1: 3 pieces
Device sizes 2 and 3: 2 pieces
2 Shield mounting kit for motor cable (only device sizes 2 and 3: 1 piece)
Mounting Instructions
Elements of the installation backplane
Pos. Description
3 Nameplate
4 DC−bus fuse
(tightening torque for screw design: 8 ... 8.5 Nm (70.8 ... 75.2 lb−in))
5 Connection for motor brake control (accessories, optional)
6 Locking clip
7 Shield connection
X100 DC−bus voltage connection
l As an alternative to using X109/X110 busbars
l Compatible to 9300 series
l Not fused via 4
X105 Motor connection
X106 Connection for motor temperature monitoring
X109
Busbars for DC−bus connection
X110
Validity information
These instructions are valid for
ƒ E94AZPMxxxx installation backplane
0Fig. 0Tab. 0