Lenze GSS - Manual (Page 9)

Safety instructions
General safety instructions for drive components
2
l
9 BA 12.0023−EN 7.0
2 Safety instructions
2.1 General safety instructions for drive components
(in accordance with Low−Voltage Directive 2006/95/EC)
At the time of dispatch, the drive components are in line with the latest state of the art and
can be regarded as operationally safe.
Scope
The following safety instructions generally apply to Lenze drive components.
The product−specific safety and application notes given in this documentation must be
observed!
General hazards
}
Danger!
Disregarding the following basic safety measures may lead to severe personal
injury and damage to material assets!
ƒ Lenze drive components ...
... must only be used as directed.
... must never be commissioned in the event of visible damage.
... must never be technically changed.
... must never be commissioned before assembly has been completed.
... must never be operated without required covers.
... can include live and rotating parts − depending on their type of protection − during
and after operation. Surfaces can be hot.
ƒ All specifications of the corresponding enclosed documentation must be observed.
This is vital for a safe and trouble−free operation and for achieving the specified product
features.
ƒ Only qualified, skilled personnel is permitted to work on and with Lenze drive
components.
According to IEC 60364 / CENELEC HD 384, these are persons who ...
... are familiar with the installation, mounting, commissioning, and operation of the
product.
... have the qualifications required for their occupation.
... know and are able to apply all national regulations for the preventions of accidents,
directives and laws applicable on site.