Lenze SIMPLABELT Compact Units - Manual (Page 19)

Commissioning
19
L
BA S’belt KE EN 1.0
5 Commissioning and operation
Stop!
The drive must only be commissioned by skilled personnel!
5.1 Before you start
Ensure that the drive is not connected to mains and does not rotate unintentionally. Please check:
l Is the mechnical fixing o.k.?
l Are the electrical connections o.k.?
l For gearboxes with ventilation:
Is the plug removed from the breather screw?
5.2 During operation
Check the drive periodically during operation and take special note of unusual noises or
temperatures, leakages, loose fastening elements, and the state of the electrical cables. If any
interference occurs, proceed according to the troubleshooting list in chapter 7. If it is not possible
to eliminate the interference, please contact the Lenze Service.
Stop!
Never adjust the speed at standstill!
Otherwise, the compact unit will be damaged!
Show/Hide Bookmarks